Important!
Thank you for buying our product, we hope that you will enjoy it.
Introduction
: This product is intended for private use to store materials, tools and gardening equipment.
Wood properties:
The product is made of natural wood
winter season, it may slightly expand and shrink during summer season. Such variations in dimensions are normal and do not af
stability or functionality of the product. It is best to unwrap the elements 48 hours before assembly and store them in a roofed area so that the
wood can adapt to the air humidity.
Storage/maintenance/installation: Before assembling the
conditions.
If the product has not been impregnated in an autoclave, it means that it has not been impregnated at all.
impregnate the parts of the shed using an insecticide, fungicide and a moisture
assembly and leave until dry for 72 hours in a dry place, away from sun, in a horizontal position.
holes in them. Also, remember to ensure expansion gaps if the shed shrinks in summer and expands in
Foundations:
Shed:
Use a concrete floor, concrete blocks or other hard surface as the foundation. In each case, we recommend covering the floor
surface with a polyurethane foil in order to protect the shed
we recommend covering the bottom part with a thick layer of hydro
to impregnate the shed with a solvent-based glaze or lacquer. We do not recommend installation of the shed in a place exposed to strong wind
Use:
In order to keep the shed in the best condition, we re
swinging in the wind. During heavy snow, remove snow from the shed roof regularly if the snow layer is over 20 cm
makeshift protective material ensuring tightness and
changed when worn or replaced with a more durable, shingle
Warranty terms:
The warranty is valid from the purchase date.
products are covered with a two-year warranty for manufacturing defects.
gaps or gaps formed during drying are acceptable as they
adjacent rings, resin pockets and any natural wood qualities. In the case of overlapping structure, please remember that all
one better looking side, which should face the outside of the shed (the other side can have slight defects due to planing, bark, cracking etc.). Th
warranty covers all defects in workmanship or material and is limited to repair or replacement of the defective part. Any pos
assembly, disassembly and impregnation are not covered.
supply at an address of residence, any complaints concerning the condition of the goods supplied are accept
registered letter sent within 48 hours from the moment of supply of the product to a given carrier (details of the carrier ar
document). We assume no liability for any damage resulting from storage or
new products returned for reasons outside the scope of our liability. If, as an exception, such products are accepted, the cl
with any possible costs of repair or transport. We never accept already assembled products. As far as wooden products are concerned, please
remember that timber is a living material that may naturally deform.
photographs of such elements.
Exclusion of warranty:
misuse of the product, use of the product for commercial purpose, use of the product contrary to its intended purpose,
replacement of the whole or part of the product or its element, use of non
its intended purpose. The warranty does not cover any defects related to the storage, assembly or insufficient impregnation.
not apply in the case of harsh weather conditions (wind
by improper leveling of the surface.
Important! Please read this manual carefully before assembly
Thank you for buying our product, we hope that you will enjoy it.
: This product is intended for private use to store materials, tools and gardening equipment.
The product is made of natural wood. Its properties may vary depending on weather conditions and exposure method.
winter season, it may slightly expand and shrink during summer season. Such variations in dimensions are normal and do not af
the product. It is best to unwrap the elements 48 hours before assembly and store them in a roofed area so that the
: Before assembling the shed, remember to store the package in a place
If the product has not been impregnated in an autoclave, it means that it has not been impregnated at all.
impregnate the parts of the shed using an insecticide, fungicide and a moisture protection agent. Apply the first layer on the inside/outside before
assembly and leave until dry for 72 hours in a dry place, away from sun, in a horizontal position. Before screwing screws to the shed parts, drill
expansion gaps if the shed shrinks in summer and expands in a rainy
Use a concrete floor, concrete blocks or other hard surface as the foundation. In each case, we recommend covering the floor
e foil in order to protect the shed from moisture. In order to ensure better protection of elements touching the surface,
we recommend covering the bottom part with a thick layer of hydro-insulation (e.g. a bituminous layer). After the assembly, it is reco
based glaze or lacquer. We do not recommend installation of the shed in a place exposed to strong wind
In order to keep the shed in the best condition, we recommend regular lubrication of door hinges and
swinging in the wind. During heavy snow, remove snow from the shed roof regularly if the snow layer is over 20 cm
tness and providing basic support. If the shed has been supplied with bituminous felt, it should be
changed when worn or replaced with a more durable, shingle-type sealing layer.
The warranty is valid from the purchase date. Any warranty claims must be accompanied by the proof of purchase. Our
year warranty for manufacturing defects. Some peculiar features, such as: growth rings, discoloring, s
during drying are acceptable as they do not affect the quality of the product, wood bending, if the assembly is possible, non
adjacent rings, resin pockets and any natural wood qualities. In the case of overlapping structure, please remember that all
e, which should face the outside of the shed (the other side can have slight defects due to planing, bark, cracking etc.). Th
warranty covers all defects in workmanship or material and is limited to repair or replacement of the defective part. Any pos
assembly, disassembly and impregnation are not covered. The warranty explicitly does not cover any claims or compensation.
supply at an address of residence, any complaints concerning the condition of the goods supplied are accept
registered letter sent within 48 hours from the moment of supply of the product to a given carrier (details of the carrier ar
We assume no liability for any damage resulting from storage or transport on the distributor’s part. We are not obliged to accept any
new products returned for reasons outside the scope of our liability. If, as an exception, such products are accepted, the cl
We never accept already assembled products. As far as wooden products are concerned, please
is a living material that may naturally deform. Any claims regarding deformed elements must be accompanied by
misuse of the product, use of the product for commercial purpose, use of the product contrary to its intended purpose,
replacement of the whole or part of the product or its element, use of non-original replacement parts, use of the product in conditions contrary to
The warranty does not cover any defects related to the storage, assembly or insufficient impregnation.
not apply in the case of harsh weather conditions (wind > 100km/h and snow > 20 cm). The warranty is excluded in the case of defects caused
depending on weather conditions and exposure method. During
winter season, it may slightly expand and shrink during summer season. Such variations in dimensions are normal and do not affect the solidity,
the product. It is best to unwrap the elements 48 hours before assembly and store them in a roofed area so that the
hed, remember to store the package in a place protected against weather
If the product has not been impregnated in an autoclave, it means that it has not been impregnated at all. Therefore, it is necessary to
Apply the first layer on the inside/outside before
Before screwing screws to the shed parts, drill
rainy season.
Use a concrete floor, concrete blocks or other hard surface as the foundation. In each case, we recommend covering the floor or the
from moisture. In order to ensure better protection of elements touching the surface,
insulation (e.g. a bituminous layer). After the assembly, it is recommended
based glaze or lacquer. We do not recommend installation of the shed in a place exposed to strong wind.
and the lock. Do not leave the door
swinging in the wind. During heavy snow, remove snow from the shed roof regularly if the snow layer is over 20 cm thick. Bituminous felt is a
If the shed has been supplied with bituminous felt, it should be
claims must be accompanied by the proof of purchase. Our
, such as: growth rings, discoloring, straight
do not affect the quality of the product, wood bending, if the assembly is possible, non-
adjacent rings, resin pockets and any natural wood qualities. In the case of overlapping structure, please remember that all boards always have
e, which should face the outside of the shed (the other side can have slight defects due to planing, bark, cracking etc.). The
warranty covers all defects in workmanship or material and is limited to repair or replacement of the defective part. Any possible costs of
The warranty explicitly does not cover any claims or compensation. In the case of
supply at an address of residence, any complaints concerning the condition of the goods supplied are accepted only in the form of a prepaid
registered letter sent within 48 hours from the moment of supply of the product to a given carrier (details of the carrier are given in the shipping
transport on the distributor’s part. We are not obliged to accept any
new products returned for reasons outside the scope of our liability. If, as an exception, such products are accepted, the client may be charged
We never accept already assembled products. As far as wooden products are concerned, please
Any claims regarding deformed elements must be accompanied by
misuse of the product, use of the product for commercial purpose, use of the product contrary to its intended purpose,
of the product in conditions contrary to
The warranty does not cover any defects related to the storage, assembly or insufficient impregnation. The warranty does
The warranty is excluded in the case of defects caused
ENG
4
4
