Wersi Pegasus Wing V2, User Manual

Page: 4 / 36

Pegasus Wing Version 2 Software
New ‘Save’ Options for Total Presets
From software version V1 R 1.02 the possible options to save the total registrations (total presets ) have been extended.
When you save a preset total , every currently active setting on your instrument (as you have set on your instrument) is
saved perfectly as heard at the time of saving. This way it is ensured that the recall of the total presets means that the in -
strument , regardless of the currently active mode , is re-set backup exactly as you saved it at the time of saving your Total
Presets.
A simple example :
They have a preset saved with a total volume of 20 on the upper manual . Then adjust the volume , for example, 127 by pull
out the volume knob. Now select the saved preset total again. It will instantly reset back to a total value of 20.
For the majority of customers this way of storage is sufficient. If you do not need the advanced Preset Saving Options , you
can skip to the next chapter .
However, there may be times when you want to be specific and save only currently active changes you’ve made specifically
for a certain preset or song piece. Saving the preset as previously described means that even if you change to a new total
preset, some of the standard settings will be retained.
In normal storage of presets total , would the currently selected overall sound for each preset call will return to the setting
that you had just chosen when saving the presets. To play all total presets with a different overall sound , you would need
the above method to save each preset many times - once for each desired overall sound.
Or you want to retain the currently active transposition for the next preset. Previously this was not possible and if you
changed to a new Total Preset, the transposition of the currently active preset would be retained.
These and similar problems you can solve elegantly over the expanded storage options.
Proceed as follows:
If you want to save, select a preset total:
1. Press the ‘Save Preset As’ button on the MAIN DISPLAY.
At the bottom left of the new ‘Save preset as’ display you’ll see that
there is a button called ‘Eweitert’. This is German for ‘Advanced’.
Press on the ‘Erweitert’ button to progress to the ‘Save Options’
screen.
You’ll notice that to the left of the main display, in the Total Preset
group of physical buttons, the background of the ‘User’ button starts
flashing. Press the button on the control panel next to the preset but-
tons . The screen displays a list of your previously saved presets. See
the example below:
Press the flashing ‘User’ button >