Werner Bantam 6, User Instructions

Page: 6 / 12

6
Model No. Length Housing
Housing
Connector
Lifeline Constituent
Lifeline
Connector
R430006 6 Feet High Impact Nylon Steel Carabiner ¾ inch Dyneema ® / polyester webbing
Steel Snap
Hook
R430006-R 6 Feet High Impact Nylon Steel Carabiner ¾ inch Dyneema
®
/ polyester webbing
Aluminum Rebar
Hook
R430006-SR 6 Feet High Impact Nylon Steel Carabiner ¾ inch Dyneema ® / polyester webbing
Steel
Form Hook
R430006TB 9 Feet High Impact Nylon Steel Carabiner ¾ inch Dyneema
®
/ polyester webbing
Steel Tie-Back
Snap Hook
R431006 6 Feet High Impact Nylon A100341 ¾ inch Dyneema ® / polyester webbing
Steel Snap
Hook
R431006-R 6 Feet High Impact Nylon A100341 ¾ inch Dyneema
®
/ polyester webbing
Aluminum Rebar
Hook
R431006-SR 6 Feet High Impact Nylon A100341 ¾ inch Dyneema ® / polyester webbing
Steel
Form Hook
R431006TB 9 Feet High Impact Nylon A100341 ¾ inch Dyneema
®
/ polyester webbing
Steel Tie-Back
Snap Hook
R433006 6 Feet High Impact Nylon A100331 ¾ inch Dyneema ® / polyester webbing
Steel Snap
Hook
R433006-R 6 Feet High Impact Nylon A100331 ¾ inch Dyneema
®
/ polyester webbing
Aluminum Rebar
Hook
R433006-SR 6 Feet High Impact Nylon A100331 ¾ inch Dyneema ® / polyester webbing
Steel
Form Hook
R433006TB 9 Feet High Impact Nylon A100331 ¾ inch Dyneema
®
/ polyester webbing
Steel Tie-Back
Snap Hook
M
ATERIALS
OPERATION
B
EFORE
E
ACH
U
SE
The user must read and understand these user instructions, as well as the user instructions for every
component and subsystem of the personal fall arrest system.
Users must have a rescue plan, and the means to implement it, that provides for the prompt rescue of
employees in the event of a fall or assures that employees are able to rescue themselves.
WARNING!
Before using a personal fall arrest system, employees must be trained in accordance with
the requirements of OSHA 29 CFR 1910.30 and 1926.503 and/or applicable local, state,
governmental and jurisdictional agencies, in the safe use of the system and its components.
Personal fall arrest systems, including SRL’s, must be inspected prior to each use for wear,
damage, and other deterioration. Defective components must be immediately removed from
service in accordance with the requirements of OSHA 29 CFR 1910.140 and 1926.502 and/or
applicable local governmental and jurisdictional standards.
H
ORIZONTAL
S
YSTEMS
Applications where the SRL is used horizontally or with a horizontal system, the SRL and horizontal
system components must be compatible. Both the horizontal and vertical distances are required for
clearance calculations. Horizontal systems must be designed and installed under the supervision of a
qualifi ed person.
These units are suitable for use with horizontal lifelines.
PERFORMANCE
Standards and
Regulations Maximum Arrest
Distance
Free Fall Limit
Maximum Arrest
Force
Average Arrest
Force
Capacity
ANSI Z359.14
SRD Class A 24 in
(610 mm)
2 ft
(0.6 m)
1800 lbs
(8 kN)
900 lbs
(4 kN)
130 - 310 lbs
(59 - 141 kg)
OSHA 29 CFR
1910.140/1926.502 42 in
(1067 mm)
2 ft
(0.6 m)
1800 lbs
(8 kN)
N/A
400 lbs
(181 kg)