Part Number
Comments
Inspector Name
Date
MODEL NUMBER:
DATE OF MANUFACTURE:
Inspection:
Official periodic inspections must be made at least semiannually. The inspections must be performed by a
competent or qualified person other than the user. If severe environmental conditions exist then inspections
must be carried out more frequently. All inspection results must be logged in the space provided above.
1.
Ensure swivel is flush with mounting surface.
2.
Ensure all labeling is affixed to the unit.
3.
Ensure the unit can rotate 360° and D-ring can flip from side to side.
4.
When reusing a previously drilled hole, inspect for debris or wallowing.
5.
Record inspection results in the space provided above.
*If inspection reveals any damage that could affect the strength or operation of the
device, inadequate maintenance, or an unsafe condition, proper disposal is required. The
anchorage connector must be tagged unusable and then properly discarded.
MAINTENANCE, CLEANING AND STORAGE
Cleaning periodically may help prolong the life and proper functioning of the product. The
frequency of cleaning should be determined by inspection and by severity of the environment.
Clean with compressed air and/or a stiff brush using plain water or a mild soap and water solution.
Do not use any corrosive chemicals that could damage the product. Wipe all surfaces with a clean,
dry cloth and hang to dry, or use compressed air. When not in use, store anchorage connectors
in a cool, dry, clean environment, out of direct sunlight and free of corrosive or other degrading
elements.
INSPECTION AND MAINTENANCE LOG
Page 10
Summary of Contents for A320003
Page 11: ...NOTES ...
