GRANUDOS 45/100 PLUS V70 Touch
Index: 03
Change date: 25.04.2018
Operating instructions no.: BA SW 001-03 Granudos 45-100 PL V70T.docx
Page 45 of 92
Example:
A Granudos 45 Plus (R max. 2kg/h) operated at 100% provides a concentration
of 0.2% chlorine = 2g Cl/l; (2000g/h in 1000l/h)
The calculated / required chlorine dosing performance of 300g/h and a chlorine
concentration of 0.2% requires a flow quantity of = 150l/h (300g Cl/h / 2.0g
Cl/l) to be set at the membrane valve above the flow meter.
ATTENTION !
The total of the flow performances calculated that way may reach
up to 1200l/h. Higher values require an increase of the chlorine
concentration.
The dosing performance calculated and set for the individual dosing lines are
entered into the operating data sheet in
Section 9.4.
5.2.11
Dosing performance assessment = Nominal performance of the granulate
dosing at the initial operation
Entering this programme requires entry of a password when a password was
issued! Password allocation is described in
Section 6.2.8, Settings;
The determination of the effective chlorine performance is required for the
calculation of the chemical substance consumption and therefore for the calculation
of the "Reserve" message for the chlorine granulate.
Check the water level in the buffer tank before the dosing performance assessment
is started. It should be at the lower filling level, as the tank is filled with plain water
for approx. 10 minutes while determining the dosing performance and the stop
may not be reached during this time.
Provide a suitable, flat collection container holding approx. 250ml (e.g. a flat bowl)
and a letter scale to facilitate speedy completion of the work.
Proceed as follows to determine the dosing performance:
When the device is in operation, stop it with the Stop button.
Press the buttons Menu
Settings . Dosing performance assessment Chlorine
in the start menu and follow the menu structure.
