GRANUDOS 45/100 PLUS V70 Touch
Index: 03
Change date: 25.04.2018
Operating instructions no.: BA SW 001-03 Granudos 45-100 PL V70T.docx
Page 88 of 92
9.4
Operating data sheet
All parameters are reset to factory defaults during
Programme change
. All
parameters must therefore be checked and readjusted after the programme has
been changed. We therefore recommend to enter the optimised, swimming-pool
specific parameters into this list.
Settings menu
Factory settings
Setting ranges
Step During commissioning
Optimised during
operation
Date:
Date:
Dosing performance
Acid
75%
10 – 100%
1
Calcium hypochlorite
75%
50 – 100%
1
Cycle time
30 seconds
---
---
---
Pressure switch (31)
1.5barg
1 – 3barg
0.25
System
Date / time
MEZ / MESZ
MEZ -12 +11
Password
----
1 - 9999
1
Display brightness
80%
9 - 100%
1
Language
EN
DE, EN, FR, FI,
NO, IT,
System version
Without feed
system
With / without
feed system
System network
(if present)
IP address
----
xxx.xxx.xx.x
Subnetmask
----
xxx.xxx.xxx.x
Gateway
----
xxx.xxx.xx.x
Feed system
(option)
Dosing performance line 1 ---
50-600l/h
Dosing performance line 2 ---
50-600l/h
Dosing performance line 3 ---
50-600l/h
Dosing performance line 4 ---
50-600l/h
Dosing performance line 5 ---
50-600l/h
Dosing performance line 6 ---
50-600l/h
Dosing performance line 7 ---
50-600l/h
Settings for pressure
maintenance valve
1.2barg
pH monitoring (option)
Set-point
pH 6,8 - 7,2
Alarm low
pH 6,5
Alarm high
pH 7,5
Time delay
5 minutes
