English
ENG
ORIGINAL INSTRUCTIONS
6
REPLACING BACKING PAD.
Insert the pad wrench between the backing pad and
brake seal to hold the spindle nut (8). Turn the backing
pad counterclockwise to remove it (9). Fit and tighten
the new backing pad with washers. Remove the pad
wrench.
MAINTENANCE.
The sander has been designed for a long working
life with minimum maintenance. Optimum use
depends on correct care of the sander and regular
cleaning. To prevent accidents, always unplug the
sander from the power source before cleaning or
performing any maintenance. The sander may be
cleaned effectively using compressed air after each
use. If compressed air is not available, use a brush
to remove dust from the sander. Motor ventilation
vents and switch levers must be dept clean and free
of foreign matter. Do not attempt to clean by inserting
pointed objects through openings. Cetain cleaning
agents and solvents damage plastic parts, among
them are gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household cleaners
containing ammonia. Do not use any of these to clean
the sander.
ENVIRONMENT PROTECTION.
The materials and components that have been
used to manufacture this product can be re-used
and recycled. Werku
®
is adhered to an Integrated
Management System that is in charge of the correct
elimination of the residues of this product. Do not
eliminate this product with domestic residues.
Werku
®
offers to its clients a free collection service
of these residues through any of its sale points, or
in the collection points established by the Integrated
Management System or in the recycling point of your
locality.
WARRANTY AND TECHNICAL SERVICE.
Werku offers a warranty that covers the repair of
all defects found due to faults in the materials or
manufacture. For this cover to be effective it is
necessary for these defects to appear within the
validity period. The consumer is entitled to free
repair of all defects (shipping costs, labour costs
and materials included), either via the repair or by
replacement (if necessary, with a later model). In any
case, Werku will not accept replacements if these
represent a disproportionate cost compared to the cost
of repair. This warranty does not affect consumer’s
rights established by European or national laws.
The validity period of this warranty is 3 years. The
validity period starts on the date of purchase by the
first consumer. This date is shown on the invoice
or receipt of purchase. Any claims arising from this
warranty must be presented to the Werku distributor
or the Werku Technical Assistance Service. To do so
you must present this warranty correctly completed
and stamped by the distributor, together with the
sales invoice or receipt. To require any information in
relation to this warranty, the buyer and/or distributor
may contact the Technical Assistance Service by
telephone on +34 981 648 119, or by e-mail at info@
werku.com. This warranty does not cover defects
caused by parts that have worn out from use other
types of natural wear, defects caused by failure to
observe the instructions for use and operation,
or for applications other than those for which this
product is intended, abnormal environmental factors,
overloading, or unsuitable maintenance or cleaning,
faults caused by the use of spare parts, accessories
or replacements that are not original Werku parts, if
the product has been totally or partially disassembled,
modified or repaired by personnel other than that of
the Technical Assistance Service or minimum and
irrelevant irregularities for suitable use or operation.
Repairs and replacements will not extend or renew
the validity period of this warranty. The replaced parts
will become the property of Werku. If the buyer sends
the product to the Technical Assistance Service, and
it fails to comply with the conditions of this warranty,
all expenses and transportation risks shall be paid
by the buyer. This warranty is only valid within the
territory of the European Union. The company
responsible for the compliance of this warranty is
Werku Tools SA.
TECHNICAL ADVICE.
The technical department of Werku
®
is at your dis-
posal to resolve any questions you may have re-
garding to its products.
If you wish to contact our
team, send an e-mail to [email protected].
Summary of Contents for WK400750
