6
© wePresent 2017
NETWORK DEPLOYMENT USER GUIDE
3
WiPG/WiCS Device Installation
3.4 Network Connection Mode (Option C)
Ethernet connected, own Wi-Fi signal off
Your wePresent is able to connect wirelessly to the local enterprise network using Wi-Fi.
Depending on your wePresent model, it can connect over 2.4GHz, or 5GHz. To do this, set your
wePresent to Wi-Fi Station Mode in the ADMIN Panel. Once configured, both guest and internal
users can access the wePresent through the network enterprise’s access point.
Network Connection Mode (Option D)
Network connected as Wi-Fi Station, own Wi-Fi signal on
Alternatively you can set wePresent to Station & AP Mode. This will make your wePresent
behave as a repeating Access Point to the network enterprise’s access point. It is still possible to
manipulate the wireless settings to make wePresent broadcast a unique SSID, channel etc.
NOTE:
If wePresent is broadcasting its own Wi-Fi signal, the Gatekeeper security feature allows
to customize network connectivity over wePresent’s Wi-Fi signal. You can restrict network
access – allow all / block all / internet only – according to network’s security level.
Recommended Enviroment
Office or school with many access points currently
installed. Also an option when corporate network consists
of segregated VLAN’s. This option is ideal when network
policies do not allow additional Wi-Fi AP’s and Ethernet
connection is not available. Additionally, if wePresent is on
a movable AV cart, it can still be network connected while
it is mobile.
Network Connection Mode
(Option C & D) Basic Diagram
NOTE:
In above scenario’s, performance may not be optimal due to two Air Hops between User
and wePresent.
Display
Company/School
Network
WiPG/WiCS
