![background image](http://html.mh-extra.com/html/wenshing/ws-cqe-ccdl/ws-cqe-ccdl_manual_956951009.webp)
P.6
Manipulating the Wireless Digital CCDL Camera
Manipulating the Wireless Digital CCDL Camera
●
Turn On
●
Turn On
●
Pair
●
Pair
●
Recharge
●
Recharge
Plug in the USBH charger here.
Press
to turn on the device, after successfully connected with the “Wireless
Digital USBH Receiver” (Hereinafter called USBH Receiver), Lamp/Setup will
then turn into blue. Once failed to connect or beyond the received range,
flashes once 2 seconds. As below fig (Fig 1)
Lamp/Setup
While the “Wireless Digital CCDL Camera” (Hereinafter called Camera) is under
the standby mode, press
and last for 4 seconds,
will
then continuously flash in blue. Meanwhile, click the pairing button on the PC
screen to process pairing. After Camera was successfully paired with USBH
Receiver,
will steadily keep in blue, and images from that camera
will be displayed simultaneously on the pc screen. Once Camera was failed to be
paired with USBH Receiver,
flashes once 2 seconds. Users may
follow the described steps to make pairs again. As below fig (Fig 1)
Lamp/Setup
Lamp/Setup
Lamp/Setup
Lamp/Setup
While
turns into yellow, it means the Camera is running out of battery. Users
may now plug in the USBH charger, and
will turn into red during recharging
The Camera should be recharged for 3 hours before first-time used, and should
be recharged for 1 hour when the battery is low.
.
On / Off
Power
5V
Blue Pairing
Red Charge
Green Low Battery
Lamp/Setup
Antenna
Digital Wireless Camera
WS-CAMERA-CCD1
WENSHING
Confidential
Do
Not
Distribution