W
E
N
S
H
IN
G C
O
N
F
ID
E
N
T
IA
L
D
O N
O
T D
IS
T
R
IB
U
T
IO
N
W
E
N
S
H
IN
G C
O
N
F
ID
E
N
T
IA
L
D
O N
O
T D
IS
T
R
IB
U
T
IO
N
9
10
Link P
ANT
WS-AV2-Sender RX
Link P
ANT
WS-AV2-Sender RX
Rs485 Power
Rs485 Power
2.Put antenna into the antenna terminal at Receiver.(P15)
3.Positioned the dip switch to the desired group.(P16)
Both the transmitter and receiver
to the same number allocated
4.Connect the attached adapter to the corresponding position from the green
terminal bracket to make sure it’s being tightly screwed by using flat-blade
screwdriver.Have D+ and D- from RS-485 tightly screwed to the corresponding
position from the green terminal bracket as shown from figure below by using
flat-blade screwdriver (only if it’s necessary).Link the green terminal bracket to
female connector from Transmitter, the LED blinks steady in yellow and the same
time another LED blinks in blue for 1 second and goes off showing the device is
functioning well.(P17)
Blue lights 1 second, yellow lit
This AV transceiver supports RS-485 interface transferring.Firstly, to set the
RS-485 data rate at 2400bps from speed dome and controller; Secondly, to
connect both Transmitter and Receiver, it then works well to remotely
control the device for various functions.(P19)
Remote control PTZ
operation
P15
P16
P17
IR
Link P
WS-AV2-Sender RX
IR
Link P
ANT
WS-AV2-Sender TX
ANT
Press the pairing key for 5 seconds from Transmitter and Receiver until the LED
blinks in blue.In the pairing mode, if it were not pairing successfully in 30
seconds, the system exits this mode automatically.If pairing is done successfully,
both LED blinks steady from both Transmitter and Receiver suggesting they are
connecting, the Receiver shows video output from the screen.(P18)
Pairing Methods
P18
Transmitting and receiver
ends Long press for about 5
seconds while”Pairing" button
Blue light blinking when pairing
Steady blue light indicates
successful pairing And outputs
the image
Remote Controller
P19
▶
Accessories
Adapter*2 Signal conversion line*2 Antenna*2(P20)
▶
▶
P20