background image

®

Content

Flowers on balconies and terraces are on the one hand the adornment of 

every house, but on the other hand also demand constant care and attention.

Even vegetable plants in greenhouses are only so-to-speak “crispy fresh” 

with regular watering.

With Tropf-Blumat you have decided on a watering-system, that assists you 

in two ways. Since now you will not only be spared the watering, but also,

above all, unnecessary water consumption. The plants draw namely only 

the quantity that they really need.

Since neither a power connection nor control is required for this system, 

it is also childsplay to install. The only tool you require is a pair of scissors. 

For the precise method of assembly, please refer to our clear and well 

illustrated assembly guide.

With Tropf-Blumat, you and your plants are guaranteed to have absolute joy.

Congratulations 

o n   p u r c h a s i n g   Tr o p f - B l u m a t

» 

Easy and trouble-free

to install

3–6

» 

Water tap or elevated 

tank as source

6

» 

Tropf-Blumat function

7

» 

How many Tropf-Blumats  

do your plants require

8

» 

What if ...?

9

» 

Blumat-Sets and 

supplementary packages

10

» 

Using Tropf-Blumat 

accessories

11

Roland Weninger

W E N I N G E R   G M B H   &   C O   K G

Summary of Contents for Tropf-Blumat













Reviews: