40
Web-Based Configuration
If a Connection Box is not operated at a controller, the network settings can be changed. The network set-
tings are saved by clicking the “Send” button. The Connection Box must be briefly disconnected from supply
power in order to activate changes to the network settings.
NOTE!
Error-free operation of the product can only be assured if correct network settings are
entered via the web
interface. It any incorrect entries are made, it may not longer be possible to contact the
device within the network.
It must be ensured that supply power is not interrupted while making changes to network
settings. Furthermore, supply power must be maintained for at least an additional 5 sec-
onds after the network settings have been saved to
memory.
Changing the password:
An additional window appears to which the new password can be entered.
NOTE!
If the password is forgotten, it’s only possible to return the Connection Box to its default
settings by means of a reset at the controller.
Reset:
The following settings are returned to their default values after activating the reset button:
• Parameters of the digital I/O ports: all digital I/O ports are switched to input.
• The password is reset to “admin”.
NOTE!
Network settings are not reset in this case! If the network settings are unknown, the device
must be connected to a controller in order to restore the settings to their default values.
Summary of Contents for ZAI02EN0 Series
Page 35: ...35 Connection Boxes...
