5
Sensoren für Ihren Erfolg
www.
wenglor
.com
Sensoren für Ihren Erfolg
www.
wenglor
.com
1. Information on CE marking of the module
1.1
EU Directive EMC
The following applies to the module described in this User Manual:
Products which bear the CE mark comply with the requirements of EU Directive „Electromagnetic Compatibility“ and the harmo-
nized European Standards (EN) listed therein.
The EU Declarations of Conformity are available at the following location for perusal by the responsible authorities in accordance
with the EU Directive, Article 10:
wengor sensoric gmbh, wenglor Straße 3, DE-88069 Tettnang
1.2
Scope of application
The modules are designed for use in the industrial sector and comply with the following requirements.
Scope of
application
Requirement applicable
to Emitted interference
Requirement applicable
to Interference immunity
Industry
EN 55011 Kl. 1
EN 61000-6-2
1.3
Note installation guidelines
The module complies with the requirements if you
1. comply with the installation guidelines described in the User Manual when installing and operating the module.
2. also follow the rules below on installation of the equipment and on working on switch cabinets.
1.4
Installation of the unit
Modules must be installed in electrical equipment rooms/areas or in enclosed housings (e. g. switch boxes made of metal or
plastic). Moreover, you must earth the unit and the switch box (metal box) or at least the top-hat rail (plastic box) onto which the
module has been snapped.
1.5
Working on switch cabinets
In order to protect the modules against static electrical discharge, the personnel must discharge themselves electrostatically
before opening switch cabinets or switch boxes.
2. Information for the machine manufacturers
2.1
Introduction
The Fieldbus Gateway module does not constitute a machine as defined by the EU "Machinery“ Directive. Consequently, the
module does not have a Declaration of Conformity in relation to the EU Machinery Directive.
2.2
EU Machinery Directive
The EU Machinery Directive stipulates the requirements applicable to a machine. The term "machine" is taken to mean a totality of
connected parts or fixtures (see also EN 292-1, Paragraph 3.1)
The module is a part of the electrical equipment of the machine and must thus be included by the machine manufacturer in the
Declaration of Conformity process.
