Settings
46
7.4 Safety Mode Without Contactor Monitoring
Procedure:
Timing Diagram
Obstructed
Unobstructed
On
Off
Safety Field
OSSD
Response Time
≤
200 ms
Wire the emitter.
0 V DC
24 V DC
F-SPS
Disconnect supply power.
DIAG3 lights up.
Pass a test object through the safety
field (beginning at the sensor connec-
tion on the control panel side up to the
other end) within 30 seconds.
Display at Receiver
SIG LOW/
DIAG4
DIAG3
EDM/DIAG2
SYNC/DIAG1
ERROR
RES
OSSD OFF
OSSD ON
Connect supply power.
Functions activated,
the receiver reboots.