DImeNSIONS
P2/8
fIxINg
Please use all the captive nuts. NeveR Remove them fRom the BaR.
Additionally, there is the mounting accessory ZBaZ001, which can connect the bar light to surfaces and give 180°
secure rotational adjustments.
Captive nuts
Screw m4
(supplied)
(not supplied)
During the set up, the light has to be switched off and unplugged. Please
use M4 screws and insert them in the captive nuts located in the back of
the light. The light will be better fixed if you spread the attachment points
symmetrically along the bar.
You can also use M4 screws (not
supplied) fastened directly into
Aluminium profile with a tightening
torque from 0.5 to 1.5 Nm. We also
recommend the use of a thread-
locker (not supplied) to avoid any
risk of loosening.
lBaxxxx
OpeRaTINg INSTRUCTIONS
Total
length*
(mm)
Height
(mm)
Width
(mm)
Illumination
length
(mm)
A
B
C
D
LBAx101
158
45
47.6
125
LBAx201
283
45
47.6
250
LBAx301
408
45
47.6
375
LBAx501
533
45
47.6
500
* Total length, without connector.
LBax101 LBax201 LBax301 LBax501
2 captive
nuts
2 captive
nuts
2 captive
nuts
4 captive
nuts
For additional sizes and colors, please speak to your
responsible sales representative.