background image

5

Pressure sensors with temperature measurement and IO-Link

The meanings of the attention-getting words, as well as the scope of the associated hazards, are listed below.

 DANGER!
This word indicates a hazard with a high degree of risk which, if not avoided, results in 
death or severe injury.

 WARNING!
This word indicates a hazard with a medium degree of risk which, if not avoided, may result 
in death or severe injury.

 CAUTION!
This word indicates a hazard with a low degree of risk which, if not avoided, may result in 
minor or moderate injury.

 ATTENTION!
This word draws attention to a potentially hazardous situation which, if not avoided, may 
result in property damage.

 NOTE!
A note draws attention to useful tips and suggestions, as well as information regarding 
efficient, error-free use.

1.3  Limitation of Liability

• The product has been developed in consideration of the current state-of-the-art and applicable standards 

and guidelines. Subject to change without notice. A valid declaration of conformity can be accessed at 
www.wenglor.com in the product’s separate download area.

• wenglor sensoric elektronische Geräte GmbH (hereinafter referred to as “wenglor”) excludes all liability in 

the event of:

• Non-compliance with the instructions
• Use of the product for purposes other than those intended
• Use by untrained personnel
• Use of unapproved replacement parts
• Unapproved modification of products

• These operating instructions do not include any guarantees from wenglor with regard to the described 

procedures or specific product characteristics.

• wenglor assumes no liability for printing errors or other inaccuracies contained in these operating instruc-

tions, unless wenglor was verifiably aware of such errors at the point in time at which the operating instruc-
tions were prepared.

Summary of Contents for FX Q0 Series


























Reviews: