2
Wenger Corporation will act as a contact and provide support for the Audio System CD/RW Upgrade Kit.
Call Wenger Corporation Customer Service with any questions or problems at 1-800-887-7145. While
Wenger Corporation will coordinate customer service with the component manufacturer, the
manufacturer of the Audio System CD/RW Upgrade KIt component is responsible for that component
warranty. There is a manufacturer’s warranty card accompanying this manual. It is important to fill out
this warranty card and register it with the manufacturer within 30 days after receipt of the system.
The warranty for the component is as follows:
Component
Warranty
Tascam CC-222 CD/RW Recorder/Cassette Deck
1 Year
MANUFACTURER
’
S OWNER MANUALS
The following manufacturer’s owner manual is contained in the shipping container.
•
TASCAM CC-222 CD Recorder/Cassette Deck Owner’s Manual
INSTALLATION
BEFORE STARTING INSTALLATION
1.
Insert this manual and the manufacturer’s Owner’s Manual (included in the shipping carton) into the
Audio System Binder that came with the Audio System.
2.
Please read and understand this entire document.
3.
Refer to the illustrations on the following pages. If you need additional information about your Audio
System CD/RW Upgrade Kit, write, telephone, or email Wenger Corporation.
4.
Refer to the Manufacturer’s documentation for addition operation information.
5.
Fill out the Tascam CC-222 CD/RW Recorder/Cassette Deck warranty card with the appropriate
serial number and mail to the Manufacturer. This warranty card must be registered with the
manufacturer within 30 days of receipt of the CD/RW Upgrade KIt.
6.
Before starting the installation, disconnect power from the Audio System Power Distribution Unit
(remove the power cord from the 120VAC power source).
INSTALL THE CD
-
RW RECORDER CASSETTE DECK
Refer to the Connection Diagrams on pages 3 to 5 showing the finished position of the CD/RW
Recorder/Cassette Deck deck and how it is connects to the Audio System.
1.
Remove the Screws that attach the Rack Shelf to the Audio System Rack. Set aside the Rack Shelf
and the Screws.
2.
Insert the CD/RW Recorder/Cassette Deck into the Rack in
place of the Rack Shelf (just below the Power Distribution
Unit).
3.
Attach the CD/RW Recorder/Cassette Deck to the Rack with
four Screws (10-32x3/4") set aside in step 1.
Typical Rack Shelf
Power Distribution Unit
WARRANTY