7
A
SSEMBLY
(
CONTINUED
)
Note:
Make sure the Percussion Cart is secure and doesn’t roll away while assembling the
curved tube extrusion (#5)
ASSEMBLE THE CURVED TUBE EXTRUSION (#5) ONTO THE PERCUSSION CART BASE.
8. Place the curved tube extrusion onto the clamps located at the top of the base assemblies (#1). Be
sure to center the curved tube extrusion so it is evenly positioned on the base units.
(Detail C)
9. Place the accessory clamp extrusion (#9) parallel to the clamp located on the base assembly.
10. Using socket screw, 5/16-18 x 3 (#12) and nylon lock nut, 5/16-18 (#13), tighten the tube clamp
extrusions together securing the curved tube extrusion.
12
9
1
13
Detail C
5
