background image

2

Important User Information

General

Copyright © 2020 by Wenger Corporation

All rights reserved. No part of the contents of this manual may be reproduced, copied, or transmitted in any form or 

by any means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage 

and retrieval systems without the written permission of the publisher, unless it is for the purchaser's personal use. 
Printed and bound in the United States of America.
The information in this manual is subject to change without notice and does not represent a commitment on the part of 

Wenger Corporation. Wenger Corporation does not assume any responsibility for any errors that may appear in these 

instructions.
In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct, indirect, 

special, incidental, or consequential damages resulting from the use or defect of these instructions.

 

The manufacturer reserves the right to change this product at any time.
The information in this document is not intended to cover all possible conditions and situations that might occur. The 

end user must exercise caution and common sense when assembling or installing Wenger Corporation products. If any 

questions or problems arise, call the Wenger Corporation at (800) 4WENGER (493-6437) 

 

or +1-507-455-4100 worldwide.

Manufacturer

The Lieto

 LED Light Fixture is manufactured by:

 

Wenger Corporation

 

 

555 Park Drive

 

 

Owatonna, MN  55060

 

 

(800) 4WENGER (493-6437) • +1 (507) 455-4100

 

 

wengercorp.com

Intended Use

•  This product is designed to be used in Wenger Acoustical Shells.

•  The fixture is not designed for use in environments that have any of the following: 

-  Damp or wet conditions IP20 rated

-  Corrosive atmospheres

-  Oil and/or chemical vapors

-  Excessive dust or explosive gases

-  Excessive heat or exposure to areas with high temperatures

-  Exposure to surges in electrical power

•  This product must be installed according to the procedures in this document.

Installation

•  This installation and use must comply with local regulations and codes.

•  All personnel (including all temporary workers) must read and understand these instructions.

Warranty

This product is guaranteed free of defects in materials and workmanship for five full years from date of shipment. 

 

A full warranty statement is available upon request.

Make sure that anyone working 

with the Lieto LED light fixture 

has read and understands these 

instructions.

Always observe and comply 

with the Warnings and 

Cautions posted on the system 

equipment.

Failure to comply with Warnings 

and Cautions in this document 

can result in damage to property 

or serious injury.

Safety Precautions

Throughout this document you may find cautions and warnings which are defined as follows:

 

•  

WARNING:

  Failure to follow the instruction could result in serious injury or damage to property.

 

•  

CAUTION:

  Failure to follow the instruction could result in minor injury or damage to property.

Read all of these safety instructions before using the equipment.

!

WARNING

!

WARNING

!

WARNING

Summary of Contents for Lieto









Reviews: