12
Wall Configuration Installation (continued)
5. Insert the Starter Connector (19) or Extension Connector (20) Connect Tubes into the
receptacle at the top and bottom of each Side Grille.
Tap the Connectors until the Connect Tubes are completely engaged with all of the Side Grilles.
6. Tighten all of the 1/4-20 x 5-1/2 Capscrews until they are snug.
Do not overtighten the Capscrews.
Tighten Capscrews
only until snug
Extension
Connector
(20)
Tighten Capscrews
only until snug
Starter
Connector
(19)
Extension
Connector
(20)
Starter
Connector
(19)
Starter Bank
of Lockers
Extension Bank
of Lockers
7. Attach the Wall Starter Tube (25) or Wall Front Extension Connector (26) to the bottom front
of the lockers using #14 x 1-3/4” Self-Tapping Screws (7).
8. Secure the lockers together using a ratchet strap across the Bottom Grilles.
9. Assemble all of the remaining banks of extension lockers by repeating steps 2-8.
Secure lockers
together with a
ratchet strap
#14 x 1-3/4”
Self-Tapping Screw
(7)
Wall Front Extension
Connector
(26)
Wall Starter
Tube
(25)
Starter Bank
of Lockers
Extension Bank
of Lockers
