19
39. Fasten five Leveler Glides (5) to the Bottom Frame (20) using a
7
/
8
" open end wrench as shown
below. Screw the Leveler Glide into the Bottom Frame until the head of the Leveler Glide is against
the Bottom Frame Weld Nut.
Do not tighten.
NOTE:
The Weld Nut is on the bottom surface of the Bottom Frame (20) as shown in the illustration
below.
40. Using the mallet, drive a Tube Plug (2) into each open end of the Bottom Frame (20).
Bottom Frame (20)
Leveler Glide,
3
/
8
-16 x 2
1
/
2
" (5)
Leveler Glide,
3
/
8
-16 x 2
1
/
2
" (5)
Bottom Frame (20)
Leveler Glide,
3
/
8
-16 x 2
1
/
2
" (5)
Leveler Glide,
3
/
8
-16 x 2
1
/
2
" (5)
Bottom Frame (20)
Weld Nut
Tube Plug (2)
Tube Plug (2)
The Weld Nut must be
on the bottom of the
Bottom Frame when the
Leveler Glide is
attached.
C
ORNER
C
ABINET
A
SSEMBLY
C
ONTINUED
