39
Secure Cabinets - UltraStor
Connect Cabinets Together
1. Depending on cabinet height, there are two to three holes at the front of the side panels for securing
the cabinets together.
See Detail A1. These holes are positioned to align the fronts of the cabinets to be flush.
See Detail A2. If different depth cabinets are to be aligned at the back, new 3/8" holes will need
to be drilled. Use the holes in the shallowest cabinet as the template for the adjacent cabinet.
2. Top closure panels will be added to close off any empty space behind cabinets not flush with the back wall.
See "Closure Panel Installation" on page 50.
This procedure is for securing UltraStor Cabinets, for AcoustiCabinets refer to page 43.
For standard installations only, contact Wenger for seismic installation instructions.
STOP
Detail A1 - Top View of Wall Mounted Cabinets Flush Front
Detail A2 - Top View of Wall Mounted Cabinets Flush Back
Wall
Empty Space
Cabinet Connection
(see next page)
Detail A3 - Top View of Back-to-Back
Island or Peninsula Mounted Cabinets
Metal Stud
(for Top Closure Panels)
Wall
Detail A4 - Top View of Single Island
or Peninsula Mounted Cabinets
Finished Back Panel
(Optional)
3. Depending on cabinet height, there are two to three holes at the front of the side panels for securing
the cabinets together.
See Detail A3. For back-to-back island or peninsula configurations, adjacent cabinet backs must
also be secured together as shown on page 42.
See Detail A4. For single island or peninsula configurations, an optional finished back panel kit
is available. See the assembly instructions included with the kit.
Anchor to Wall
(if available)
Cabinet Connection
(see next page)
Anchor to Wall
(if available)
Cabinet Connection
(see next page)
Cabinet Connection
(see next page)
