![background image](http://html1.mh-extra.com/html/wen/pw20/pw20_manual_956470011.webp)
11
TROUBLESHOOTING
IMPORTANT: If trouble persists, please call our customer help line at (800) 232-1195 M-F 8-5 Central Time.
PROBLEM
CAUSE
SOLUTION
Machine stops during
operation.
1. You blew a fuse.
2. Nozzle partially blocked.
1. Replace the fuse. Turn off
other products sharing the cir-
cuit before doing so.
2. Clean the nozzle.
Machine pulsating
1. Air has collected in the inlet
hose.
2. Insufficient water supply
3. Blocked nozzle.
4. Blocked water filter.
5. Kinked hose.
1. Allow the machine to run
while holding the trigger until
adequate pressure returns.
2. Make sure the water tap is
open as far as possible.
3. Clean the nozzle.
4. Clean the water inlet adapter
filter.
5. Unkink the hose.
Machine doesn’t turn on. 1. Machine not plugged it.
2. Defective socket.
3. Fuse has blown.
4. Defective extension cord.
1. Plug that puppy in!
2. Try a different outlet.
3. Replace the fuse.
4. Try it without an extension
cord.
Fluctuating Pressure
1. Pump bringing in air.
2. Dirty or broken valves.
3. Pump seals are worn out.
1. Tighten the hose connections
and make sure they are air tight.
2. Clean/replace the valves.
3. Order replacement seals (call
1-800-232-1195).
Machine starts and stops
by itself.
1. Leaking pump/spray gun.
2. Broken trigger on spray gun.
3. Ghost in machine.
1 & 2. Call 1-800-232-1195 for
assistance.
3. Persuade the ghost to leave.
Machine starts without
any water
1. No water supply.
2. Frozen pump/hose.
3. Blocked water filter.
4. Blocked nozzle.
1. Connect the water supply.
2. Thaw out your frozen stuff.
3. Clean out the water inlet
adapter filter.
4. Unblock and clean the
nozzle.
Summary of Contents for PW20
Page 13: ...13 EXPLODED VIEW PARTS LIST ...