NOTE:
Replacement parts can be ordered from wenproducts.com by searching the part number (refer to the ex-
ploded view and parts list on pages 14 & 15). Use only identical replacement parts designated from your pressure
washer. Parts that wear down over the course of normal use (such as hoses, filters, nozzles, etc.) are not covered by
the two-year warranty.
HIGH PRESSURE HOSE
The high pressure hose (PW19-016) can be damaged easily and should be carefully stored. Do not kink the hose.
Do not drive vehicles or place heavy objects over the hose. Do not expose the hose to sharp objects. Don’t chew on
it either. Regularly inspect the hose for cuts, bulges, or leaks which can develop from kinking or wear. If damage is
found, replace the hose immediately to prevent serious injuries.
WARNING:
Risk of electric shock - Always switch off the pressure washer, disconnect the power plug
and turn off the water before performing any adjustments or maintenance.
MAINTENANCE & STORAGE
WATER INLET FILTER
Check the water inlet filter (PW19-025) periodically for deposits. Clean
this filter regularly for maximum performance. Remove the water inlet
filter (Fig. 11) and rinse it with warm water to clean out debris and buildup
before operating the pressure washer.
SPRAY NOZZLE
Regularly clean the spray tip on the spray lance and detergent bottle to pre-
vent the nozzle from clogging.
Make sure the power plug is disconnected, the water is turned off and all
pressure is relieved from the unit. Turn the adjustable nozzle counterclock-
wise to move the metal plates apart. Use a nozzle cleaner (Fig. 12) or a
needle to dislodge any foreign materials that are clogging or restricting the
spray tip.
Nozzle Cleaner
12
Fig. 12
Fig. 11
Water Inlet
Filter
STORING THE PRESSURE WASHER FOR EXTENDED PERIODS
1. Clean the spray nozzle and water inlet filter before storing the unit.
2. To protect and extend the life of your pressure washer, we recommended running the unit with a pump anti-
freeze or pump protector or a pump conditioner before storing the unit for long periods of time. Follow the direc-
tions on your preferred pump protector for proper use.
3. Store your pressure washer and accessories indoors where the temperature will stay above freezing (32°F/0°C).
Do not store it near the furnace or other sources of heat as it may dry out the pump’s seals.
4. Keep the pressure washer upright on a level surface. Cover the machine to protect it from dust. Do not allow
high pressure hose to become kinked during storage.
PRODUCT DISPOSAL
Used pressure washers should not be disposed of with household waste. This product contains electric components
that should be recycled. Please take this product to your local recycling facility for responsible disposal and to mini-
mize its environmental impact.
Summary of Contents for PW19
Page 14: ...14 EXPLODED VIEW PARTS LIST...
