SPECIFIC RULES FOR THE MITER SAW STAND
1. For maximum stability, use the miter saw stand ONLY ON A FLAT, LEVEL SURFACE.
2. BE CAREFUL when raising or lowering the stand to prevent trapping fingers or hands.
3. DO NOT step or climb on the stand.
4. Before operation, ensure that the snap buttons on each leg are in the LOCKED POSITION and the material
supports are LOCKED IN PLACE.
5. ENSURE that the miter saw is securely fastened to the stand to prevent unwanted movement of the saw.
6. DO NOT OVERLOAD the side extension arms.
7. The main frame can support 750 pounds of total weight (saw + material). DO NOT EXCEED THIS
WEIGHT FOR ANY REASON.
8. DO NOT USE IF THE STAND BECOMES DAMAGED IN ANY WAY.
9. MAKE SURE THE MITER SAW IS AS CENTERED AS POSSIBLE to maintain balance of the stand.
Unbalanced stands can tip during operation and hurt you.
13. AVOID ACCIDENTAL START-UPS. Make sure the power switch is in the OFF position before plugging in
the power cord.
14. REMOVE ADJUSTMENT TOOLS. Always make sure all adjustment tools are removed from the saw before
turning it on.
15. KEEP GUARDS IN PLACE AND IN WORKING ORDER.
16. DO NOT OVERREACH. Keep proper footing and balance at all times.
17. NEVER LEAVE A RUNNING TOOL UNATTENDED. Turn the power switch to OFF. Do not leave the
tool until it has come to a complete stop.
18. ALWAYS remove the power cord plug from the electrical outlet when making adjustments, changing parts,
cleaning, or working on the tool.
19. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order. Follow instruc-
tions for lubricating and changing accessories.
4
GENERAL SAFETY RULES
Summary of Contents for MSA750
Page 10: ...THANKS FOR REMEMBERING...
