![background image](http://html.mh-extra.com/html/wen/ll2156/ll2156_instruction-manual_956576020.webp)
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
Motor will not start.
1. Machine not plugged in.
1. Plug unit into power source.
2. Incorrect size of extension cord.
2. Choose the proper size and length of
extension cord.
3. Worn carbon brushes.
3. Replace carbon brushes; see p. 18.
4. Blown fuse on main PCB.
4. Replace fuse (
F5AL250V)
. Contact
customer service at
1-800-232-1195
for assistance.
5. Defective power switch, PCB, or
motor.
5. Contact customer service at
1-800-
232-1195.
Variable speed does not work.
1. Defective potentiometer (LL2156-
055).
1. Contact customer service at
1-800-
232-1195
2. Defective PCB.
2. Contact customer service at
1-800-
232-1195
Dust collection ineffective.
1. Side panel open.
1. Make sure side panel is closed for
optimum dust collection.
2. Dust collection system not strong
enough.
2. Use a stronger system, or reduce the
length of the dust collection hose.
3. Broken/blocked blower bellows or
line.
3. Contact customer service at
1-800-
232-1195.
Excessive vibration.
1. Machine speed set at a harmonic
frequency of the saw.
1. Adjust speed up or down to see if
issue is resolved.
2. Machine not secured to work sur-
face.
2. Secure machine to work surface.
3. Incorrect blade tension.
3. Adjust blade tension (see p. 13).
4. Hold-down foot not being used.
4. Adjust hold-down foot to slightly
clear workpiece surface when cutting.
5. Loose fastener.
5. Check machine for loose fasteners.
6. Defective bearing.
6. Contact customer service at
1-800-
232-1195.
Blades keep breaking.
1. Blade tension set too high.
1. Reduce blade tension; see p. 13.
2. Incorrect blade size.
2. Use a larger (thicker) blade more
suitable for the job at hand.
3. Incorrect blade tooth pitch.
3. Choose a blade with more or fewer
teeth per inch (TPI); a minimum of 3
teeth should contact workpiece at all
times.
4. Excessive pressure on blade.
4. Reduce pressure on blade. Let the
tool do the work.
Blade drift, or otherwise poor cuts.
1. Excessive pressure on blade.
1. Reduce pressure on blade. Let the
tool do the work.
2. Blade mounted upside-down.
2. Mount blade with teeth pointing
down (towards work table).
Tension mechanism does not work.
1. Broken tension linkage or knob.
1. Contact customer service at
1-800-
232-1195.
20