Wen HA5932, Instruction Manual

Page: 9 / 20

Pre-Assembled
UNPACKING
With the help of a friend or trustworthy foe, carefully remove the Spindle Sander from the packaging. Make sure to
take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing
list below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact
our customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com .
PACKING LIST
ASSEMBLY/ADJUSTMENT TOOLS
The tools listed below are not included but are required for either assembly or adjustment:
• Straightedge
Rubber Drums
UNPACKING & TRANSPORTATION
WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure
to follow the safety instructions may result in serious personal injury.
9
Sanding Sleeves
Parts & Accessories
Hardware & Tools
1" Rubber Drum 0.75" Rubber Drum 1.5" Rubber Drum
1.5" Sleeve 1" Sleeve 0.75" Sleeve 0.5" Sleeve
Anchor Bolt (2)
Wing Nut (2)
Knob (2)
Lock Knob
13mm Washer
Sander
6mm Washer
Clip (2)
Table Mounting Pad Guide Plate