![background image](http://html1.mh-extra.com/html/wen/df1200x/df1200x_instruction-manual_956387013.webp)
13
ASSEMBLY & ADJUSTMENTS
ASSEMBLY
Refer to the packing list to gather the proper parts and
tools for installing the feet, wheels, and handles.
NOTE:
There are different sizes of bolts/nuts; be sure to
use the proper bolts/nuts for each assembly step.
INSTALLING THE FEET
The feet are installed on the air filter side of the generator.
1. Prepare a set of blocks on level ground (a 4×4 block of
wood works well). Place the generator on the blocks. Have
someone help you lift the generator.
2. Secure the foot (Fig. 2 - 1) onto the bottom of the foot
bracket (Fig. 2 - 2) with an M6x25 bolt (Fig. 2 - 3) and an
M6 nut (Fig. 2 - 4). Repeat for the other foot.
3. Align the foot bracket with the holes on the frame and
secure with an M8x25 bolt and an M8 nut (Fig. 2 - 5). Re-
peat for the other bracket.
INSTALLING THE WHEELS
1. Slide one of the wheels (Fig. 3 - 1) and a 17mm flat
washer (Fig. 3 - 2) onto the wheel axle (Fig. 3 - 3).
2. Align the wheel axle with the holes on the frame and
secure it with the cotter pin (Fig. 3 - 4).
3. Repeat steps 1 and 2 for the other wheel.
INSTALLING THE HANDLES
The handles are installed on the air filter side of the genera-
tor.
1. Align the handle (Fig. 4 - 1) with the holes on the genera-
tor frame.
2. Secure using an M8x50 bolt and an M8 nut (Fig. 4 - 2).
3. Repeat steps 1 and 2 for the other handle.
CONNECTING THE LPG HOSE
1. Connect the fitting (Fig. 5 - 1) on the LPG regulator hose
to the LPG tank (not included).
2. Connect the nut (Fig. 5 - 2) on the other end of the LPG
hose to the LPG inlet on the generator (Fig. 5 - 3). See pp.
16 - 17 for more information.
Fig. 2
Fig. 3
Fig. 4
Fig. 5
5
1
2
3
4
1
2
3
4
2
1
1
2
3
Summary of Contents for DF1200X
Page 35: ...WIRING DIAGRAM 35...