SHARPENER SAFETY
1. This sharpener is designed for sharpening and hon-
ing cutting tools, using the appropriate accessories.
Using the machine for any other purpose for which it
is not designed may result in serious injuries, machine
damage and voiding of the warranty.
2. Grinding wheel safety:
• Only use grinding wheels rated for a speed higher
than 115 RPM (maximum RPM of the tool).
• Inspect wheels for cracks or fragments before start-
ing the machine. Replace damaged wheels imme-
diately. Never use a questionable grinding wheel,
as the RPM of the machine can send broken wheel
fragments flying at high speeds.
• Do not use a wheel that vibrates. If a wheel vibrates,
it may be that the bearings of the shaft need replac-
ing.
• Make sure the grinding wheel is dressed properly
and evenly.
• Check that the grinding stone can rotate smoothly
before starting the machine.
• The grinding wheel is for grinding. Never attempt to
cut anything with the grinding wheel.
3. The use of accessories or attachments not recom-
mended by the manufacturer may result in a risk of per-
sonal injury.
4. Make sure the water reservoir is filled with water to
the maximum fill line before operation. Check the water
level regularly and refill as necessary. Never attempt to
sharpen a blade when the grinding stone is dry.
5. DANGER: fire hazard. Do not grind or polish magne-
sium or magnesium alloys.
6. Preventing accidental starting. Make sure the power
switch is in the OFF position prior to plugging in the
machine. Always make sure the power switch is in the
OFF position and the machine is unplugged when doing
any cleaning, adjustments, assembly, setup operations,
or when not in use.
PERSONAL SAFETY
1. Operate in a well ventilated area. Keep the floor area
around the Sharbener level and free of slippery sub-
stances or other tripping hazards.
2. Wear ANSI-approved safety goggles to protect your
eyes from sparks and chips. Use hearing protection to
protect yourself from hearing loss.
3. DO NOT wear loose clothing or jewelry as they might
get drawn in by the tool. Tie back long hair.
4. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in close
proximity to pacemakers could cause pacemaker inter-
ference or pacemaker failure.
5. Chips are harmful to your health. Use NIOSH-ap-
proved dust masks or other respiratory protection dur-
ing operation and cleaning.
6. Always turn off and unplug the Sharpener before
making any adjustments or repair tasks. Never adjust
the Sharpener or the workpiece while the tool is run-
ning.
PREPARING THE SHARPENER
When transporting the Sharpener, carry it by either the
handle or the base. Never carry the device by its guards
or its accessories.
1. Examine the Sharpener for any damaged or missing
parts. Replace or repair damaged parts before opera-
tion. Periodically check that all nuts, bolts and other fas-
teners are properly tightened.
2. Do not operate this tool until it is completely assem-
bled and installed according to the instructions. Make
sure all adjustments are correct and all connections are
tight. Keep all guards in place.
DURING OPERATION
1. Never start the machine with any load already applied
to either grinding wheel. Stand to the side of the sharp-
ener during start-up. Switch it ON and let the sharpener
SPECIFIC RULES FOR YOUR SHARPENER
WARNING!
Do not operate the power tool until you have read and understood the following instructions
and the warning labels.
6
