background image

DURING CUTTING OPERATIONS

1. Always stand to one side when operating the saw. 

Never have any part of the body in line with the path of 

the saw. Never hold a workpiece in your hand or across 

your legs while cutting. 

2. Ensure hands are away from the cutting area and 

blade. 

3. Feed work into the blade against the direction of rota-

tion of the blade only.

4. If you are interrupted when operating the saw, com-

plete the process and switch the saw off before looking 

up.

5. Power tools must always be held by the insulated 

gripping surfaces when performing an operation, en-

suring protection if the cutting tool makes contact with 

its own cord or hidden wiring. Contact with a ‘live’ wire 

will make exposed metal parts of the power tool ‘live’ 

and shock the operator if the insulated gripping surfac-

es are not used.

6. Do not use the metal band saw unless all guards are 

in place. Do not operate with any guard disabled, dam-

aged, or removed. Moving guards must move freely and 

close instantly.

7. Blade guide, supports, bearings, and blade tension 

must be properly adjusted to avoid accidental blade 

contact and to minimize blade breakage. To maximize 

blade support, always adjust the upper blade guide and 

blade guard so that it barely clears the workpiece.

8. Turn on the band saw and let it reach full speed, then 

slowly slide the workpiece into the blade. This will help 

produce safer and cleaner cuts.

9. Never cut more than one piece at a time. Do not stack 

workpieces together. Do not attempt to cut material 

thicker than specified on page 3 of this manual.

10. If a cut does not extend to the edge of the work-

piece, or if the blade binds in the cut, allow the blade 

to come to a complete stop and lift the workpiece away 

from the blade.

11. Turn off tool and wait for saw blade to stop before 

moving workpiece or changing settings. Do not slow 

or stop a blade with a piece of wood or by hand. Let 

the blade come to rest naturally. Do not attempt to free 

a jammed blade while the machine is still running and 

connected to power.

SPECIFIC RULES FOR YOUR METAL BAND SAW

WARNING! 

Do not operate the power tool until you have read and understood the following instructions 

and the warning labels. 

7

Summary of Contents for BA4555





















Reviews: