Dust Port
Accessory Storage
(On 3 sides of the machine)
Spindle
Spindle Upper Washer
Sanding Drum & Sleeve
Throat Plate
Circuit
Breaker
ON/OFF Switch
with Safety Key
Work Table
Rubber
Sanding
Drums
Mounting Holes
CLEANING THE WORK TABLE SURFACE
Your sander's work table comes protected with a layer of anti-rust coating. Clean the rust-protected surfaces using
a soft cloth, moistened with kerosene. Do not use gasoline, or cellulose-based solvents such as paint thinner or
lacquer thinner, as these will damage the painted surfaces.
After cleaning, apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean, dry cloth.
KNOW YOUR SPINDLE SANDER
UNPACKING
With the help of a friend or trustworthy foe, carefully remove the Spindle Sander from the packaging. Make sure to
take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing
list below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact
our customer service at
1-800-232-1195
(M-F 8-5 CST), or email
.
TOOL PURPOSE
Spindle sanding is the preferred method of removing material from inside curves and irregular edges. The oscil-
lating spindle moves up and down as it rotates to help smooth workpiece surfaces quickly and evenly. Refer to the
diagram below to become familiarized with the parts and controls of your spindle sander.
WARNING!
Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure
to follow the safety instructions may result in serious personal injury.
FRONT
VIEW
9
