Wen 61702, Operator'S Manual

Page: 3 / 12

3
SAFETY RULES
Hello! The purpose of the following safety symbols is to attract your attention to possible dangers. We don’t want
any of our beloved customers accidentally injuring themselves. The safety symbols and the explanations with them
deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
These instructions and warnings are not substitutes for proper accident prevention measures (obviously).
Symbol Meaning
Safety Alert Symbol: Indicates danger, warning, or caution. This may be used in conjunction with
other symbols. Always follow the safety precautions to reduce the risk of fire, electric shock and
personal injury.
NOTE: advising you of information or instructions is vital to the operation or maintenance of the equipment.
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician.
WARNING
- Do not attempt to operate this tool until you have thouroughly read and understood all instruc-
tions, safety rules, etc…contained in this manual. Failure to comply can result in accidents involving fire, electric
shock, or serious personal injury. Save this operator’s manual and review frequently for continuing safe operation
and instructing others who may use this tool.
Safe operation of this power tool requires that you read and understand this operator’s manual and all labels af-
fixed to the tool. Safety is a combination of common sense, staying alert, and knowing how your tool works.
Safety is a combination of common sense, staying alert and knowing how your item works.
SAVE THESE SAFETY
INSTRUCTIONS.
WARNING:
To avoid mistakes and serious injury, do not use your tool until the following steps have been read
and understood
1. READ and become familiar with this entire instruction manual, no matter how boring it may be. LEARN the
tool’s applications, limitations, and possible hazards.
2. REGULATE AIR PRESSURE. Use air pressure that is compatible with the ratings on the nameplate of the tool
(not to exceed 100 psi or 6.9 bar). Do not connect the tool to a compressor rated at over 175 psi even in the event
of a regulator failure.
3. USE ONLY clean dry and regulated air. Condensation from an air compressor can rust and damage the internal
workings of the tool.
4. ALWAYS keep your work area clean, uncluttered, and well lit. DO NOT work on floor surfaces that are slippery
with sawdust or wax.
5. KEEP BYSTANDERS AT A SAFE DISTANCE from the work area, especially when the tool is operating.
NEVER allow children or pets near the tool.
6. DO NOT FORCE THE TOOL to do a job for which it was not designed.