ASSEMBLY & ADJUSTMENTS
HIGH ALTITUDE OPERATION ABOVE 3000 FEET
Refer to Fig. 1 to gather the proper parts and tools for in-
stalling the high altitude kit. Installation instructions are in-
cluded with the high altitude kits.
This kit should be installed by a qualified mechanic. Con-
tact customer service at
1-800-232-1195
(M-F 8-5 CST), or
email [email protected] for information about
service centers near you.
The fuel system on this generator may be affected by opera-
tion at high altitudes. Proper operation can be ensured by
installing an altitude kit at altitudes higher than 3000 feet
above sea level. At elevations above 7000 feet, the engine
may experience a decrease in performance, even with the
proper altitude kit. Operating this generator without the high
altitude kit at elevations above 3000 feet may increase the
engine’s emissions and decrease both fuel economy and
performance.
ATTACHING THE FEET (FIG. 2)
1. Stack the two generator wheels on top of each other. Lift
the end of the generator that has the recoil starter onto the
stack of wheels. Be careful not to obstruct any holes on the
generator frame. Feel free to use board or a different reliable
stacking surface instead.
2. Place one leg onto the frame. Line up the holes on the
generator frame with the holes on the bracket portion of the
leg. Tighten using two M6x40 bolts, two M6 nuts, and the
included wrench.
3. Repeat step 2 for the other generator leg.
NOTE:
For video instructions visit bit.ly/WHEELKIT
ATTACHING THE HANDLES (FIG. 3)
The handles attach to the generator frame on the same side
as the recoil starter (Left side when facing control panel).
1. Take one handle and line up the holes in the handle brack-
et with the holes on the generator frame.
2. Slide a bolt through the holes in the handle and generator
frame to hold the handle onto the frame.
3. Secure the bolt in place with a nut.
4. Repeat steps 1-3 for the other handle.
At this point, gently remove the two wheels from underneath
the generator.
Fig. 2
12
Fuel Cup Seal (1)
Bolt Seal (1)
Main Jet (1)
Fuel Cup Seal (1)
Bolt Seal (1)
Main Jet (1)
3000 - 6000 ft High Altitude Kit (1)
6000 - 8000 ft High Altitude Kit (1)
Fig. 1
Fig. 3
Summary of Contents for 56475
Page 37: ...WIRING DIAGRAM 37...
Page 39: ...NOTES 39...