background image

INSTRUCTION MANUAL

MODEL 418CV

ÉTAU POUR PERCEUSE

 8-3/8-INCH 

CROSS VISE

PARTS

Fig. 1

Top View

Fig. 2

Top View

ASSEMBLY

1. Remove all components and parts from the box. Your cross vise includes the following 

hardware:
•  (3) Hex Wrenches
•  (2) Locking Nuts

•  (2) Flat Washers
•  (2) Crank Handles

2. If necessary, adjust the longitudinal (top) feed screw until the handle-mounting portion of 

the feed screw protrudes beyond the vise body, as shown in Fig. 1 below. Turning the feed 

screw clockwise retracts it; turning it counterclockwise advances it. Turn the feed screw fully 

clockwise until it can no longer retract.

3. Mount one of the crank handles on the leadscrew, as shown in Fig. 2 below.
4. 

Secure the crank handle to the feed screw using the included flat washer and locking nut (Fig. 

2). Tighten the nut (turning clockwise) against the handle using a 10 mm socket (not included), 

then back it off a quarter turn (turning counterclockwise). Turn the handle a couple of times. If 

it is difficult to turn, loosen the nut. Adjust the nut as necessary to ensure that the handle turns 

smoothly and advances the slide properly.

5. Repeat the same procedure to mount the remaining crank handle on the cross feed screw.

Crank Handle

Feed Screw

Flat Washer

Locking Nut

Clockwise Brings 

Feed Screw Out

Counterclockwise 

Sends Feed Screw 

In

No.

Part No.

Description

Qty.

1

416CV-001

Base

1

2

416CV-002

Nut

1

3

416CV-003

Saddle

1

4

418CV-004

Gib

2

5

416CV-005

Hex Nut, M6

6

6

416CV-006

Set Screw, M6x20

4

7

413CV-007

Flat Washer, M6

2

8

418CV-008

Longitudinal 

Feed Screw

1

9

416CV-009

Cross Feed 

Screw

1

10

416CV-010

Retaining Plate

1

11

416CV-011

Socket Head Bolt, 

M8x20

4

12

416CV-012

Crank Handle 

Assembly

2

No.

Part No.

Description

Qty.

13

413CV-013

Locking Nut, M6

2

14

418CV-014

Leadscrew With 

Handle

1

15

418CV-015

Guide Rod

1

16

418CV-016

Body

1

17

416CV-017

Socket Head Bolt, 

M8x20

4

18

418CV-018

Movable Jaw

1

19

416CV-019

Dog Point Set 

Screw, M8x10

1

20

418CV-020

Jaw Plate

1

21

418CV-021

Grooved Jaw 

Plate

1

22

416CV-022

Retaining Plate

1

23

416CV-023

Set Screw, M6x25

2

24

416CV-024

Lock Washer, M6

4

25

414CV-025

Ball Bearing

1

Reviews: