9
KNOW YOUR LAWN MOWER
4
6
1
1
Trigger Switch
2
Safety
3
Key Switch
4
Grass Catcher
5 Cutting Height Adjustment Handle
6
Side Chute
7
Side Discharge Door
8
Rear Discharge Door
9
Battery Holder
5
2
3
ASSEMBLY
WARNING:
Always be sure to remove the battery before adjusting, adding ac-
cessories, or checking a function on the tool.
INSTALLING THE HANDLE (FIG. A)
Fully loosen the handle locking knobs on either side of the machine (Fig. A - 1). Once the locking knobs have
been fully loosened, pull back on the top of the handle to position it into operating position. Once the handle has
been properly positioned, retighten the handle locking knobs.
SETTING THE HEIGHT OF THE UPPER HANDLE
There are three different holes (Fig. A - 2) on the side of the upper handle to vary the height of the trigger switch.
If the height seems too tall or too short, adjust the hole through which this locking knob is placed accordingly.
INSTALLING THE MULCHING PLUG (FIG. B)
NOTE: Do not install the grass catcher, the side chute or the mulching plug simultaneously. When one is in-
stalled, the other two should not be.
1. Lift up the rear discharge door (Fig. B - 1).
2. Grab the handle of the mulching plug and slide it into the opening in the back of the mower.
3. Lower the rear discharge door.
7
8
9