Wen 40441 Manual Download Page 3

GENERAL SAFETY RULES

3

Safety is a combination of common sense, staying alert and knowing how your item works. 

SAVE THESE SAFE-

TY INSTRUCTIONS. 

 
1. READ and become familiar with this entire instruction manual. LEARN the tool’s applications, limitations, and 
possible hazards. 

2. AVOID DANGEROUS CONDITIONS. Do not use power tools in wet or damp areas or expose them to rain. 
Keep work areas well lit. 

3. DO NOT use power tools in the presence of flammable liquids or gases. 
 
4. ALWAYS keep your work area clean, uncluttered, and well lit. DO NOT work on floor surfaces that are slippery 
with sawdust or wax. 

5. KEEP BYSTANDERS AT A SAFE DISTANCE from the work area, especially when the tool is operating. 
NEVER allow children or pets near the tool. 

6. DO NOT FORCE THE TOOL to do a job for which it was not designed. 

7. DRESS FOR SAFETY. Do not wear loose clothing, gloves, neckties, or jewelry (rings, watches, etc.) when op-
erating the tool. Inappropriate clothing and items can get caught in moving parts and draw you in. ALWAYS wear 
non-slip footwear.

8. ALWAYS remove the battery when making adjustments, changing parts, cleaning, or working on the tool. 

9. KEEP GUARDS IN PLACE AND IN WORKING ORDER. 

10. AVOID ACCIDENTAL START-UPS. Make sure the power switch is in the OFF position before plugging in 
the power source.

11. REMOVE ADJUSTMENT TOOLS. Always make sure all adjustment tools are removed before turning it on. 

12. NEVER LEAVE A RUNNING TOOL UNATTENDED. Turn the power switch to OFF. Do not leave the 
tool until it has come to a complete stop. 

13. NEVER STAND ON A TOOL. Serious injury could result if the tool tips or is accidentally hit. DO NOT store 
anything above or near the tool. 

14. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order.

15.  CHECK  FOR  DAMAGED  PARTS.  Check  for  alignment  of  moving  parts,  jamming,  breakage,  improper 
mounting, or any other conditions that may affect the tool’s operation.

16. DO NOT operate the tool if you are under the influence of drugs, alcohol, or medication that may affect your 
ability to properly use the tool.

WARNING: 

To avoid mistakes and serious injury, do not plug in your tool 

until the following steps have been read and understood. 

Summary of Contents for 40441



















Reviews: