![background image](http://html.mh-extra.com/html/wen/39707/39707_manual_956554012.webp)
PREPARATION & ADJUSTMENTS
WARNING:
To prevent injury from accidental operation, switch OFF and unplugged the tool before
making any adjustments.
ADJUSTING THE VISE
The position and angle (0 to 45 degrees) of the vise can
be adjusted to securely hold your workpiece in place.
To adjust the position of the left movable jaw:
1. Locate the vise adjustment wheel (Fig. 12 - 1) on the
left side of the saw base.
2. Rotate the wheel clockwise to move the jaw towards
the center (tighten). Rotate the wheel counterclockwise
to move the jaw away from the center (loosen).
To adjust the angle of the jaws:
1. Loosen the bolts on the jaws (Fig. 13 - 1).
2. Tilt the jaws to the desired angle. You can refer to the
angle scale on the back of the saw base (Fig. 14).
3. Tighten the bolts to lock the jaws in place.
ADJUSTING THE BLADE GUIDE BRACKETS
There are two blade guide assemblies (Fig. 15 - 1) on the
left and right of the exposed blade. Adjust the position of
the blade guides to just clear the workpiece.
1. Loosen the blade guide adjustment knobs (Fig. 16 - 1)
2. Slide the blade guides assemblies as close as possible
to the workpiece, without interfering with the cut.
3. Tighten the knobs to lock the blade guides in place.
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
1
1
1
1
1
12
Summary of Contents for 39707
Page 22: ...EXPLODED VIEW PARTS LIST 22 ...
Page 23: ...EXPLODED VIEW PARTS LIST 23 ...
Page 28: ...THANKS FOR REMEMBERING ...