![background image](http://html.mh-extra.com/html/wen/3966/3966_instruction-manual_956551016.webp)
GENERAL CUTTING
WARNING:
Operating a band saw involves a certain amount of
hazard. Read the instructions and plan your work before cutting a
workpiece.
1. Use scrap lumber to check the settings and to get the feel of operating the
band saw before attempting regular work.
2. Do not turn the power on before all adjustments have been made. Check to
make sure the upper guard is in place. Always keep the upper blade guard close
to your work, approximately 1/8” (3.2 mm) above the workpiece.
3. Do not force the workpiece against the blade. Light contact permits easier
cutting and prevents unwanted friction and heating of the blade. Sharp saw
blades need little pressure for cutting. Steadily move the workpiece against the
blade without forcing it.
4. It is recommended that a dust collection bag be connected to the dust port
when sawing wood.
5. Use the band saw for straight line operations such as cross-cutting, ripping, miter cutting, beveling, compound
cutting, and resawing.
6. To avoid twisting the blade, do not turn sharp corners; instead, saw around corners. A band saw is basically a
“curve-cutting” saw. It is not capable of doing intricate inside cutting as can be done with a scroll saw.
WARNING:
Do not use this band saw to cut ferrous metals.
16
OPERATION
USING THE MITER GAUGE
1. Place the miter gauge into the slot on the table. (Fig. BB)
2. Loosen the knob on the gauge to set a new miter angle (between
0 and 60 degrees).
3. Tighten the knob firmly before cutting begins.
Fig. BB
USING THE PUSH STICK (Fig. CC - DD)
The push stick serves as an extension of the hand and protects
against accidental contact with the saw blade. The push stick must
be used if the distance betwen the bandsaw blade and the rip
fence is less than 5.9 inches. When the push stick is not used, it
can be stored on the hook provided on the bandsaw frame (Fig.
DD). Replace the push stick if damaged.
Fig. CC
Fig. DD
Summary of Contents for 3966
Page 18: ...18 EXPLODED VIEW PARTS LIST ...
Page 22: ...THANKS FOR REMEMBERING ...