![background image](http://html.mh-extra.com/html/wen/36703/36703_manual_956538011.webp)
CUTTING GUIDE INDICATOR (Fig. 6)
The cutting guide indicators can be found at the front and rear of the
saw base. This guide helps to indicate where the cut will be occurring.
Before cutting, draw a guideline on the workpiece and follow the guide-
line with the cutting guide to create more accurate cuts.
USING THE LASER (Fig. 7)
The laser located on the top of your saw can also be used to indicate the
line of cut. Remove the laser cover and install the two AG13 batteries.
Securely replace the laser cover. Switch the laser ON and align the laser
line with your cutting guideline.
WARNING:
Do not look directly into the laser beam with
unprotected eyes. See page 7 for important rules regarding
laser safety.
ASSEMBLY & ADJUSTMENTS
SETTING THE DEPTH OF CUT (Fig. 1 & 2)
Before making a cut, it is important to set the correct cutting depth. The saw’s maximum cutting depth is 63/64
inch (25 mm). We recommend adjusting the cutting depth about 1/16 inch (2 mm) deeper than the thickness of the
material. To adjust the cutting depth, you can either reference the depth scale, or the edge of the workpiece.
Using the Depth Scale:
1. Disconnect your saw from the power source.
2. Flip up the depth lock lever (Fig. 4) to loosen it .
3. Slide the depth lock lever so that the arrow points to your desired cutting
depth indicated on the depth scale (Fig. 5).
4. Press down on the depth lock lever to securely lock the depth setting.
Using the Edge of the Workpiece:
1. Disconnect your saw from the power source.
2. Flip up the depth lock lever to loosen it and slide the lever to all the way
to the right of the slot.
3. Place the base plate onto the workpiece with the saw blade positioned
against the left edge of the workpiece.
4. Grip the tool and push the blade release switch forward with your thumb.
Lower the blade to your desired cutting depth by observing how deep the
blade will cut relative to the top face of the workpiece.
5. Holding the saw in position at a constant depth, slide the depth lock
lever to the left until it is flush against the edge of the inner blade guard.
6. Press down on the depth lock lever to securely lock the depth setting.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Depth Lock Lever
Depth Scale
Cutting Guide Indicator
Laser
Laser Switch
11
Summary of Contents for 36703
Page 16: ...16 EXPLODED VIEW PARTS LIST ...
Page 18: ...THANKS FOR REMEMBERING ...