Weltem WPH-5000, Owner'S Manual

Page: 19 / 24

ICEN MANUAL
19
There are 2 fi lters in the unit. The evaporator fi lter is located at the front of the unit. The con-
denser fi lter is located at the rear of the unit.
1. Open the front grill.
2. Slide fi lter up and use vacuum cleaner to remove the dust from the fi lter.
3. If the fi lter is heavily covered with dust and dirt, warm water and mild soap or neutral deter-
gent may be used to wash the fi lter. Do not use any other chemicals to clean fi lter, as they will
likely damage the fi lter.
4. Dry the fi lter in a shaded area before replacing it. Do not operate the unit without the fi lter
installed and the fi lter guard in the closed positi on.
5. Replace the clean fi lter and close the fi lter grill.
6. To clean the condenser fi lter, lift up on the rear fi lter from the middle bar slightly and then
angle the fi lter outwards from the bott om and remove.
7. Use the sale cleaning procedure as above (3~5)
8. To replace the condenser fi lter, place the top of the fi lter in the guide and slide the fi lter up
unti l the bott om of the fi lter clears the frame.
Then push the bott om of fi lter into the guide and let fi lter into guide and let fi lter fall inside the
guide.
NOTE : For eff ecti ve cooling clean the fi lter at least every 2 weeks.
– Remove dust from the fi lter using a vacuum
cleaner hose att achment.
– If required wash the fi lter in lukewarm water
with a mild detergent. Leave to dry in a shaded
area before reinstalling.
– Pull the fi lter frame forward to remove the front
fi lter.
– Slide fi lter up and use a vacuum cleaner to remove
the dust from the fi lter.
– Lift up on the rear fi lter from the middle bar slightly
and then angle the fi lter outwards from the bott om
and remove.
(4) FILETER CLEANING
(Removing Filters)
(Removal of dust)
– Pull the filter frame forward
to remove the front filter
– Slide filter up and use
a vacuum cleaner to remove
the dust from the filter.
– Remove dust from the filter
using a vacuum cleaner
hose aachment.
– If required wash the filter in
lukewarm water with a mild
detergent. Leave to dry in
a shaded area before
reinstalling.