page
17
Owner’s Manual
HPC-3000 / WPC-4000 / HPC-5000 / WPC-7000 / WPC-9000 / WPC-15000
3. If the filter is heavily covered with dust and dirt, warm water and mild soap or
neutral detergent may be used to wash the filter. Do not use any other chemi-
cals to clean the filter, as they will likely damage the filter.
4. Dry the filter in a shaded area before replacing it. Do not operate the unit
without the filter installed and the filter guard in the closed position.
5. Replace the clean filter and close the filter guard.
6. To clean the condenser filter, lift up on the rear or side filter from the middle
bar slightly and then angle the filter outwards from the bottom and remove.
7. Use the same cleaning procedure as in steps 3-5 above.
8. To replace the condenser filter, place the top of the filter in the guide and slide
the filter up until the bottom of the filter clears the frame. Then push the bot-
tom of the filter into the guide and let the filter gently fall inside the guide.
NOTE:
For effective cooling, clean the filter at least every 2 weeks.
DO NOT operate without the filter installed
DO NOT operate the unit with a damaged cord or
plug, after the unit malfunctions, or if the unit has
been dropped or damaged.
WARNING
WARNING
