WELTECH BW-2050, Manual

Page: 9 / 11

REMOTE COMMANDS
The following commands are accepted at the serial port.
ID? Send id message
ALL? Send ver cal every bird list for current store
WGT? Send current weight
DATA? Send summary report for current store
HYST? Send histogram for current report
TARG? Send target weight
TARG,nnnn Set target weight
DUMP? Send all weights
STATS Send a sta s cs summary
SER? Send serial number
EACH Turns on the each bird print
EAOFF Turns o ff the each bird print
HYON Turns on the histogram print
HYOFF Turns o ff histogram print
STON Turns on sta s c print
STOFF Turns o ff the sta s c print
UP Send bird dump in binary Data Pod format
DATE? Send the date ddmmyy
TIME? Send the me hhmm
DATE,ddmmyy Set the date ddmmyy
TIME,hhmm Set the me hhmm
CLEAR Clear memory
PRINT Print standard reports
SETTS Print se ngs report
RESET Restart the processor
OFF Power down
16
USING THE USB
Turn weigher on and open PRINT OPTIONS , and make sure WRITE TO
USB is on.
Plug USB s ck into port (Shown on page 15) and press PRINT DATA .
Once the fi le is wri en FILE WRITTEN OK will appear on the screen, the
data is now downloaded. Remove the USB s ck from the weigher and
plug into your computer.
Go to MY COMPUTER and open USB DISK FILES . Now select all the fi les
and right click, a small dropdown menu should appear with the op on
OPEN WITH.. now select CHOOSE DEFAULT PROGRAM and select
MICROSOFT EXCEL .
Or
Open Microso Excel. Select FILE in the top le corner and then click
OPEN . It will now open a small window, click on MY COMPUTER and
select the USB DISK icon. Select all the fi les you want to see and then
click open. (You selected mul ple fi les by holding down CTRL and
clicking each fi le)
17