WellGate 3512 Technical Manual EN-V1.00
Copyright © 2007 Welltech Computer Co., Ltd. All right reserved.
56
Chapter 4 Wireless Operation Modes
The WG3512 provides 8 modes for wireless operation, including:
Access Point: With NAT and Without NAT.
Client
(Infrastructure)
Client
(Ad-hoc)
P2P
Bridge
WDS
Repeater
Universal
Repeater
WISP
WISP + Universal Repeater
Here we will guide the purpose and configuration steps for these modes.
Access Point
When acting as Access Point, the WG3512 connects all the stations (PC or Notebook with wireless network
adapter) to a wired network. All stations can have the Internet access if only the WG3512 has the Internet
connection. In this mode, you can also enable or disable NAT function. Below is example to show you Access
Point mode with NAT and Access Point mode with out NAT.
Access point with NAT
¾
Step1: Power on WG3512 and set one pc to connect with WG3512. Set PC to DHCP then PC
should got an IP as 192.168.123.x by default.
¾
Step2: Enter 192.168.123.123 for the WEB interface of WG3512 with no login ID and
password.
¾
Step3: Go to the page of Operation, set WG3512 to Gateway mode. In this mode, NAT is
ADSL/ Cable Modem
WG3512
WLAN
WAN
Notebook with Wireless
Network Adapter
Internet
PC with Wireless
Network Adapter
LAN
PC connected with LAN
port of WG3512
