50
Appendix A --- HTTP auto provision
Get the HTTP provision packet from Welltech and start the provision as
follows:
Step 1: build mac list for mass configuration file generation
Please open the “wg3232s MAC.csv gotten from Welltech by using Microsoft
Excel. You can refer to the picture below. Normally, you should get all required
configuration mac list from Welltech and use it for configuration file
generation.
For FXS>
The wg3232s MAC.csv contains most frequently changed parameters as
following:
MACAddress: Wellgate 3232s MAC Address (user can type more MAC
address here).
fxs1.displayname ~ fxs32.displayname: display name for each line.
fxs1.password ~ fxs32.password: user password for register to SIP proxy
for each line.
fxs1.telno ~ fxs32.telno: Tel number for each line.
fxs1.userid ~ fxs32.userid: User ID for register to SIP proxy for each line.
Please save and close it.
Step 2: create a template configuration file.
Open the “wg3232s Parameter.txt” getting from Welltech and make the
required change. Please at least make the changes for those provision and SIP
proxy settings.
For detail, please refer to the comments of “wg3232s
Parameter.txt”.
Step 3: Make the change for wegencfg.ini as follows if necessary
# Template File
BaseFile=.\wg3232s Parameter.txt
# MAC list file
ListFile=.\wg3232s MAC.csv
# 0: Off, 1: On
Encrypt=0
Step 4: Generate the individual configuration file.
Double click the “wtgencfg.exe”, it will generate the configuration file for
each MAC list in “MAC address.cfg” as the following pictures.
