46
DM Group: Select DM group 1 to 4 in case it requires a DM (for
example remove the prefix) before to make the call.
Create Route Plan>Backup Route
Backup Route Active: Active the backup route or not.
Outgoing Type: The backup route outgoing call type.
Hunting Type: The hunting method will be used for this route. Please
refer to the Primary Route.
Routing List: The backup routing target list will be used for this route.
Route DM Group: Select DM group 1 to 4 in case the backup required
the DM before to make the call. The DNIS is unchanged by the primary
route DM and same as the DNIS before routing. For example, the DNIS
is 886282265699 and primary DM group remove 886 and use it (DNIS
= 282265699) to make call. When backup route is started, the DNIS is
still unchanged as 886282265699. This makes the DM easy to predict
and implement.
Two special default routes, “
VOIP Default Route
” and “
FXS default Route
”,
are used as the default routing when there is not any other routing are
matched. It is not recommended to disable these two default routes. The
FXS default route is used when a FXS outgoing call’s default routing. VOIP
default route is used for a VOIP incoming call’s default routing.
CH9 Status
Wellgate 3232s provides the system status here.
Figure 9-0 Status page
