manualshive.com logo in svg

WELLTECH FXO-08 - RELEASE NOTE V101A, User Manual, Page: 61 / 71

Share
Download
WELLTECH FXO-08 - RELEASE NOTE V101A User Manual Download Page 61

                                                           

FXO-08 Technical Manual EN-V2.0a

 

   

60 

3.5.3 3 Updating the firmware by HTTP 

 

1.

 

Under Device Management => Software Upgrade web menu, specify the 
location of the firmware by clicking the Browse button next to the Http Upload 
text box. 

2.

 

You will be prompted with a window requesting the location of the firmware. 

3.

 

Locate the firmware that is stored in your hard drive. 

4.

 

Once located, click the Open button. 

5.

 

Back in the web configuration menu, press the Start button (next to the Http 
Upload’s browse button) to execute the upgrade process. 

6.

 

Please wait while the device updates itself with the firmware. 

7.

 

After the update process is finish, you will be taken to a web page indicating 
that it was successful (see figure below). 

 

Note

:  For consistency, it is recommended to reload default setting

 

every time 

you update the firmware on the FXO-08.  However, you will lose all the settings 
configured on the FXO-08 except Network configuration.   For more details on 
reload default setting, please refer to the next page below. 

 

 

 

 

 

 

Summary of Contents for FXO-08 - RELEASE NOTE V101A








































































Reviews:

No comments