FXO-08 Technical Manual EN-V2.0a
35
3.3.8 Caller ID Setting
Caller ID Setting (Line 1~Line 8)
Enable/Disable the caller ID detection
AUTO:
You can Enable/Disable this
function by line. If Line1~Line 8 uses
the same mode, you only need to set
line 1 and click the “Auto” button, then
the other lines will set the same mode
automatically.
DTMF Caller ID Start Symbol
Specify the DTMF Caller ID Start
Symbol
The default symbol is D.
DTMF Caller ID End Symbol
Specify the DTMF Caller ID End Symbol
The default symbol is C.
1.
Press the
“Apply”
button (at the bottom) after you finish to save changes.
2.
Press the
“Reboot”
button to apply the changes
.