![background image](http://html1.mh-extra.com/html/welltech/ata-171p-release-note-v103/ata-171p-release-note-v103_user-manual_955870098.webp)
ATA Web user guide
98 / 114
2015/1/8
Item Decription
General] ->[Auto Answer]
or
[Phone – Caller Service] ->
[Forward]
. If ATA was set
Forward & Auto-answer
, the CID of
incoming call will be forwarded to SIP Server.
Generate Flash
Signal for FXO
Default is 10 (equal to 100ms).
Generate Flash Singal for FXO: 100ms
When the Flash signal :
< (less than) 100 ms, it will be regarded as Hook Flash.
>(longer than) 100 ms, it will be regarded as On-Hook.
Unit: 10ms. Maximum length is 3 digits.
FXS Port Coutry
Default is USA type impedance. To select FXS Port impedance of
the analog telephone by different country’s specification.
Flash Signal
Detect (Max)
Default is 60 (equal 600ms). To detect Hook Flash Time at
maximum time. When Flash time is
less than 600ms
, it was
regarded as HOOK FLASH command.
When Flash time is longer than 600ms, it was regarded as
On-Hook (drop call) command. Configuration range is from
(4~255), Unit: 10ms. Maximum length is 3 digits.
Flash Signal
Detect (Min)
Default is 7(equal to 70ms).
When Flash Time is longer than 70ms, it will be regarded as
FLASH command.
When Flash Time is less than 70 ms, it will be regarded as
On-Hook. Configuration range is from (3~12), Unit: 10ms.
Minimum length is 3 digits.
NET Bandwidth
Limit
Default is Disable. LAN port bandwidth limitation.
Option: Disable,
128, 256, 512, 1024, 2048, 4096, 8192 kbps
.
Submit [button]
Save the configuration.
10.5.3
Operate Instruction
Example 1: System Log
(Please Start TFTP or System Log Server)
System Log Type: All
Step 1: In [Management - Advanced Setting] web page, Set up [System Log Server:
192.168.50,99, System Log Type: All] (See Figure 1).
(Figure 1)
Step 2: In [TFTP]’s [Syslog server] web page, this page show log message data (See
Figure 2).