5. Start to installation
The following will show you how to install and
configure the ATA-151/152 step by step.
Scenario 1. XDSL connection
Connect to XDXL modem directly.
Please refer the
figure 3
to install.
Step 1.
Plug RJ-45 cable for connecting from LAN port to
XDSL modem..
Step 2.
Plug RJ-11 cable for connecting to a valid analog
phone.
Step 3.
Plug RJ-11 cable CO PSTN line into PSTN port.
Step 4.
Plug the power adapter with valid power into DC 12V
port for getting adaptable power to ATA.
Step 5.
Now, please check the LED indicator for make sure if
the LED status as the following:
1. Power: ON
2. Status: Blinking
3. Phone: It should be off, if the handset of
analog phone is not picked up
4. LAN: ON
5. PC: ON
Step 6.
Plug RJ-45 cable for connecting from PC port.
Note:
Please disable the fuirewall to prevent some
error that during configuration if there is any
firewall software is installed. You can restart
the firewall after the configuration is finished.
PSTN
CO line
XDSL Modem
PC
Figure 3.
6
Scenario 1.1. Cordless connection
Also you can connect a cordless phone to ATA for
instead of a cord phone as
figure 5
if you don't
want to be limited by a annoying cord, and there is
no any special setting.
Scenario 2 HUB connection
Connect to HUB or switch HUB directly.
Please refer the figure 6 to install.
All of step of setup is same with
scenario 1.
PSTN
CO line
XDSL Modem
PC
Figure 5.
7
PSTN
CO line
XDSL Modem
PC
Figure 6.
HUB