background image

Postmate 3 User’s Manual

- 24 -

4-2 Handling paper jams

 
 

Removing the jammed paper at the upper cassette

 
 

1. Open the top upper cassette safety cover.

 

2. Pull out the upper cassette and remove any jammed paper.

 Caution
 

 

Please be cautious when removing jammed forms as it may result in     

                      damaging the upper cassette.

 

Removing jammed paper at the lower cassette

 

1. Open the lower cassette cover.

 

2. Remove any jammed paper.

 

Removing jammed paper at the press unit.

 

There can be different reasons for a paper jam at the press unit.

 
 

A. Double Feed

 

 

1. Try to remove the jam by using the jam free button.

 

 

2. If the jam is not cleared by using the jam free button, please use the jam

                         removal handle to manually remove the jam.

When removing the jam, turn the press 
rollers by inserting the jam removal ratchet 
and turn it clockwise like the picture.

     Caution
1. Turn off the power.

2. Never operate the machine with the jam 
    removal handle set up.

 Important
 

- The press rollers are designed to accept 60~120 gsm forms.  Any forms that are

             heavier may affect the machine to malfunction.

Summary of Contents for postmate 3































Reviews: